USER GUIDE FALCON
239 EN2Z-0962GE51 R0715
www. The parameters can be sorted columnwise. To sort the list, click the
BROWSE button at the Sort by field.
For parameters, the following properties are shown:
• Parameter Path
Shows the path of the parameter. By clicking on the entry, you can browse
downwards the path.
• Name
To edit a parameter, click on its name in the Name column
• Value/Unit
Current value and associated engineering unit (analog) / state text (discrete)
• Symbol Type
Shows the control icon name which the parameter belongs to. If the
parameter belongs to a loop, LOOP will be displayed.
Change Parameter
Procedure 1. In the list under Parameters, click on the parameter in the Name column. If the
parameters are not displayed, navigate through the parameter path by clicking
as follows:
xxx. Downward navigation is done by clicking on the entry in the Parameter
Path (Flat view) column or Symbol Type column (Drill Down View). Upward
navigation is done by clicking on the Upward icon
at the Path field. When
the parameter is reached it is displayed and accessible in the Name column.
To Next Page
Loading...
