FALCON USER GUIDE
EN2Z-0962GE51 R0715 184
General Procedure
1. On the Datapoints tab, click on the datapoint in the Name column (see also
"View Datapoints List" section).
RESULT: The Details dialog box of the selected datapoint displays.
Example: Analog Input Details of AI.
By default, the Values tab is selected.
2. View / change desired datapoint details by selecting the desired tab, of which
functions are described in the following:
• General
Shows general properties such as description, LON mapping data, and
access rights
See "View General Properties" section as follows.
• Alarming
Enable/disable alarm reporting
Enable/disable Off-Normal conditions
See "View / Edit Alarming" section as follows.
• Values
Manually override the present value, that switch between Manual and Auto
mode View alarm status (flags)Change COV value
See "View / Edit Values" section in the following.
To Next Page
Loading...
