USER GUIDE FALCON
205 EN2Z-0962GE51 R0715
5. Select another time zone from the Current Time Zone drop-down list box,
6. Check the Automatically adjust Clock for Daylight Saving Changes option.
7. To save changes, click the SUBMIT button.
NOTE: You can only change clock and time zone settings if your access
level is equal to or higher than the access level defined for this
action in the User Administration.
View/Change Cycle Time Categories
The cycle time category defines the (target) time in ms after a control loop is
restarted automatically.
Target cycle times are grouped in the following categories with descending priority:
• Very Fast.
• Fast
• Medium
• Slow
In other words, a control loop which has the very fast category assigned, is executed
more often in the same time.
Each control loop is assigned to one of these categories. Any changes done to the
target cycle time will affect all control loops assigned to the corresponding category.
The controller executes multiple control loops simultaneously (multitasking). There is
a dynamic relation between the target cycle time categories as shown in the
following diagram:
To Next Page
Loading...
