Honeywell Centraline FALCON - Reporting; Reset to; Runtime (Active Time); Scaling Factor

FALCON USER GUIDE
EN2Z-0962GE51 R0715 68
Equivalent
Defines the value that will be written to the present value, if the priority list is empty
which means that no other value is present in the priority list. The relinquish default
value allows starting up a control system with a defined status/value. The relinquish
default value is predefined in the application in CARE and can be changed in the
Excel Web HTML Interface.
For further information on priority levels and command priorities, please refer to the
"Priority Level" section.
Reporting
Datapoint Type
AI
AO
AV
BI
BO
BV
MI
MO
MV
PC
RI
RO
User Interface HTML Interface CARE
Editing
x x
Equivalent Transition Events
Defines, which transition type will be reported, that is, which transition should be
saved in the alarm buffer and in the alarm list in the HTML Interface.
See also "Transition Events" section.
Reset to
Datapoint Type
AI AO AV BI BO BV MI MO MV PC RI RO
User Interface HTML Interface CARE
Editing
x
Equivalent
Resets the current value of the pulse converter or the runtime counter of a binary
output to a specific value. The counting will restart.
See also "Current Value" section.
Runtime (Active Time)
Datapoint Type AI AO AV BI BO BV MI MO MV PC RI RO
User Interface
HTML Interface
CARE
Editing "Reset to"
Equivalent
Shows the runtime of the connected device. The runtime (active time) can be
changed by reset.
The runtime can be reported as follows:
In CARE, use the IDT statement to read the ´Elapsed Active Time` property of a
datapoint. Compare this value to a limit value and use an additional point to report
an alarm.
Scaling Factor
Datapoint Type AI AO AV BI BO BV MI MO MV PC RI RO
User Interface
HTML Interface CARE
Editing x
Equivalent