FALCON USER GUIDE
EN2Z-0962GE51 R0715 154
Schedules
Please refer also to the "Time Programs" section, p. 113.
Schedules are daily and weekly time programs, which switch datapoints by setpoints
or statuses. Schedules are assigned to plants and each schedule can command
datapoints of that plant.
Each schedule specifies a list of datapoint properties to command (switchpoints) on
a weekly basis. The week program defines the normal daily activity of the system by
specifying which switchpoints are to be commanded each day of the week. The
week program applies to a definable time period. There is only one week program
per schedule.
Besides the week program, specific programs called exceptions can be created.
Exceptions have higher priority than the week program and will overwrite the week
program for a definable time period.
View Existing Schedules
Procedure 1. In the tree, expand the Advanced item, then the Plants item and navigate to the
plant of which schedules you want to display.
2. On plant level, click on Schedules.
RESULT: On the Schedules tab on the right, all existing schedules of the
plant are displayed.
The column order of the existing schedules can be displayed differently by
applying a filter. When selecting By Schedule Name, the Schedule Name
column will be the first column, followed by the Switched Properties column.
When selecting By Switched Properties, the Switched Properties column will
be the first column, followed by the Schedule Name column.
By entering a string in the Search String field specific schedules can be
displayed. Usage of wildcards (* and ?) is possible.
To Next Page
Loading...
