CGW-MB Installation and Users’ Manual | P/N:LS10248-000HW-E | REV.G | JUL/31/2022 28
Panel Brand and Connection Settings Configurations
Figure 5.3: Connection Indicators
5.3 Panel Brand and Connection Settings
When the mobile App is connected with the CLSS Site Manager, you can change the panel
brand’s communication settings.
5.3.1 To Change the Connection Settings
1. To change the newly connected panel’s settings:
1. Select the Customer and the Site.
2. Tap on your connected CLSS Gateway mainboard from the list of CLSS Gateway
mainboards.
OR
To change the previously connected panel’s settings:
1. Tap the three dots at the top right on the mobile App.
2. Tap Install Fixed CLSS Gateway mainboard.
3. Select the Customer and the Site.
4. Tap on your connected CLSS Gateway mainboard from the list of CLSS Gateway
mainboards.
2. Tap on the Panel Brand & Connection option on the CLSS Gateway mainboard
Summary screen.
3. Tap on Panel Brand.
4. Change the panel brand, if required.
5. Tap NEXT.
6. Select the connection type for the panel from the Connection Type screen.
7. Tap APPLY.
8. Tap Panel Type on the CLSS Gateway mainboard Summary screen.
9. Change the values for the panel brand on the Communication Settings screen.
10.Tap SAVE.
DL4 Flashing slow The CLSS Gateway mainboard is communicating
with CLSS Site Manager
Flashing fast The CLSS Gateway mainboard has the Internet
connectivity, but not the CLSS Site Manager
connectivity
a FLASHING FAST = 0.2 second ON and 0.2 second OFF
b FLASHING SLOW = 1 second ON and 1 second OFF
LED Indicator State Meaning
DL5 Flashing slow The CLSS Gateway mainboard has wireless
connection with CLSS Site Manager
DL7 OFF There is no cellular connection.
Flashing slow The LTE radio is transmitting data for the cellular
connection.
Flashing fast The LTE radio has connectivity issues.
NOTE: You can change the connection settings using either the CLSS mobile App or the
CLSS Gateway mainboard Configuration Tool.
To Next Page
Loading...
