CGW-MB Installation and Users’ Manual | P/N:LS10248-000HW-E | REV.G | JUL/31/2022 164
Gent Panels Connecting to the Panels
Figure C.18: COMPACT Panels: RS-232 Connections on the PB6 Terminal
3. Power Connection
On the CLSS Gateway mainboard Side
1. Ensure that the RS-232 cable is connected with the RS-232 port of the CLSS
Gateway mainboard.
2. Ensure that the S7 switch next to the RS-232 port is switched towards NUP_IN.
Figure C.19: The S7 Switch
On the Panel Side
At the PB15 terminal of the panel,
• Connect the Red wire (+ve) to the +24V pin.
To Next Page
Loading...
