CGW-MB Installation and Users’ Manual | P/N:LS10248-000HW-E | REV.G | JUL/31/2022 175
NOTIFIER® UL Connecting to the Panels
• High-speed or standard-speed network of panels:
• Connect to the +24V external power source or to the internal power supply of the
panel.
• To power the HS-NCM or NCM over NUP from the CLSS Gateway mainboard:
Find the S7 switch next to the NUP port, and switch it towards NUP_OUT.
On the Panel Side
• Stand-alone Panel: Ensure that the NUP cable is connected with the NUP port (J1)
of the panel.
• Network of Panels: Connect to a +24V external power source or to the panel’s
power supply port.
To Next Page
Loading...
