CGW-MB Installation and Users’ Manual | P/N:LS10248-000HW-E | REV.G | JUL/31/2022 185
VESDA® Detectors Connecting to the Panels
External Power Supply
• On the CLSS Gateway mainboard Side
Connect to the power port of the CLSS Gateway mainboard.
Refer to Figure C.2 where the power port on the CLSS Gateway mainboard is
labeled as 7. It is the P2 pin on the CLSS Gateway mainboard board.
• On the External Power Supply Side
Connect to the 24V DC external power supply.
•
To Next Page
Loading...
