EasyManua.ls Logo

Honeywell CGW-MB - Page 19

Honeywell CGW-MB
187 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CGW-MB Installation and Users’ Manual | P/N:LS10248-000HW-E | REV.G | JUL/31/2022 18
CLSS Gateway mainboard Board Layout Overview
DL3
Panel Connectivity LED
Indicates the connection status of the panel
FLASHING SLOW (flashes once per 1 second) The panel is connected with
the CLSS Gateway mainboard board.
FLASHING FAST (flashes once per 0.2 second) The CLSS Gateway
mainboard is fetching the inventory data.
ON Configuration mode is enabled for configuring the CLSS Gateway
mainboard network settings.
OFF The CLSS Gateway mainboard is not communicating with the panel.
DL4
CLSS Site Manager Connectivity LED
Indicates the CLSS Gateway mainboard connection status with CLSS Site
Manager
ON The CLSS Gateway mainboard is downloading the firmware from the
CLSS Site Manager.
FLASHING SLOW (flashes once per 1 second) The CLSS Gateway
mainboard is connected with CLSS Site Manager.
FLASHING FAST (flashes once per 0.2 second) The CLSS Gateway
mainboard is connected with Internet, but not connected with the CLSS
Site Manager.
OFF The CLSS Gateway mainboard is not connected with Internet.
DL5
Wireless Connectivity LED
Indicates the CLSS Gateway mainboard wireless connectivity status
FLASHING SLOW (flashes once per 1 second) The wireless connectivity is
enabled for the CLSS Site Manager connection.
OFF The wireless connectivity is disabled.
DL7
Cellular Connectivity LED
Indicates the LTE radio connection status
FLASHING SLOW (flashes once per 1 second) The LTE radio is
transmitting data.
FLASHING FAST (flashes once per 0.2 second) The LTE radio may have a
connectivity issue, which requires attention.
OFF There is no cellular connection.
Table 2.2: LED Indicators and Their Messages (Continued)

Table of Contents

Related product manuals