Getting Started
Part No.: 4417584_Rev12 Configuration Manual
CIU 888 3 - 29
3.2.5.2 Modify Ambient Temperature Properties
1. Click the Ambient Temperature tab, the properties detail appears.
You can view or edit these properties:
System decimal separator Select (point) or ,(comma)
This indicates the decimal separator in which
data would be presented to the user in CIU
888 Service tool and CIU 888.
System thousand separator Select (point), space or ,(comma)
This indicates the thousand separator in
which data would be presented to the user in
CIU 888 Service tool and CIU 888.
Code CRC fault behavior This option sets the CIU behavior in the case
of code CRC check failure.
• Stop functioning - CIU core functionality
stops.
• CIU operations continue with data set to
recalibrated and CIU CRC (Entity96)
marked as corrupted so that Signature
Alarm will be raised in Entis Host System.
Sync Link Timeout This indicates the time interval after which
passive CIU would set all the field and calcu-
lated values to timeout status when sync link
is broken.
Properties Description
Ambient temp. gauge address Enter ambient temperature transmission
address.
Ambient temp. gauge TOI Select A, B, C, E or M*.
Ambient temp. gauge TOR Select C or ZAG*.
Ambient temp. scan enabled Check to enable ambient temperature scan.
* Refer to TABLE 3-1 for additional information.
Properties Description
To Next Page
Loading...
