62
FireLite SLC Wiring Manual — P/N 51309:R3 7/29/2019
Section 11: Addressable Manual Pull Station
11.1 Description
The BG-12LX is an addressable manual pull station with a key-lock reset feature.
11.2 Installation
11.2.1 Setting an SLC address
Each unit is factory preset with an address of “00.” To set an SLC address refer to “Setting an SLC address for a Single Point Module”
on page 33.
11.2.2 Wiring a Manual Pull Station
Figure 11.1 shows typical wiring for a BG-12LX Manual Pull Station to an SLC:
NOTE: For more information refer to the Installation Instructions provided with this device.
SLC
To next device
on SLC
S
L
C
-
b
g
1
2
lx
2
.
w
m
f
Figure 11.1 Wiring of a BG-12LX Pull Station to an SLC
To Next Page
Loading...
