Performance Series IP Camera Software Configuration Guide
40
Figure 6-8 SNMP
Table 6-4 SNMP Configurations
Parameter Function
SNMP Version
When SNMP v1 is selected, the device can only process SNMP v1
information.
When SNMP v2 is selected, the device can only process SNMP v2
information.
When SNMP v3 is selected, you can set user name, password and
authentication type.
The server needs to set the corresponding management system
account when you want to access the device. For best security,
use SNMPv3. You can select SNMPv1 only, SNMPv2 only, both
SNMPv1 and SNMPv2, or SNMPv3 only.
SNMP Port
This
is the listening port of the proxy applications in the device. The
default value is 161. The value ranges from 1 to 65535.
Read Community
The community string will read all the objects the SNMP supported
in the specified name. The default setup is public.
Write Community
The community string will read/write/access all the objects the
SNMP supported in the specified name. The default setup is write.
Trap Address
The destination address of the trap information from the proxy
program of the device.
Trap Port
By default, the Trap Port is 162. To change the port, enter a
number in the range 1 to 65535.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
