EasyManuals Logo

Honeywell HC30W45R2 User Manual

Honeywell HC30W45R2
113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
CHAPTER
10
Honeywell 30 Series IP Cameras User Guide
3 USING THE MAIN PAGE
This chapter contains the following sections:
Logging in to the Camera via the Web Client, page 10
Using the Main Page, page 13
Fisheye Main Page, page 16
Logging in to the Camera via the Web Client
Using the web client, you can monitor live video, play back recorded video, and configure
camera settings.
Before You Begin
Before you log in to the web client, ensure that the following conditions are met:
The camera is properly connected to the network.
The camera’s IP address and the PC’s IP address are in the same network segment.
If there is a router, set the corresponding gateway and subnet mask.
A network connection has been established. To check this, ping the camera’s IP
address. (Enter "ping [IP address]").
Logging in to the Camera
Logging in via Internet Explorer
1. Type the camera’s IP address in the address bar of Internet Explorer, press Enter
on the keyboard. For example, if your camera’s IP address is 192.168.1.108, you
would type https://192.168.1.108.
Note: Internet Explorer 11 (or later) with ActiveX plug-in is supported.

Table of Contents

Other manuals for Honeywell HC30W45R2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell HC30W45R2 and is the answer not in the manual?

Honeywell HC30W45R2 Specifications

General IconGeneral
Windows operating systems supportedWindows 10, Windows 7
DC-in jackYes
Ethernet LAN (RJ-45) ports1
Lens diameter2.8 mm
Fixed focal length2 mm
Maximum aperture number2
DC output voltage12
Power source typeDC, PoE
Power consumption (max)12.95 W
Operating temperature (T-T)-30 - 60 °C
Operating relative humidity (H-H)0 - 90 %
Wi-FiNo
Number of users10 user(s)
Ethernet interface typeGigabit Ethernet
Bit rate controlConstant Bit Rate (CBR)
Total megapixels5 MP
Gain control typeAuto
Maximum resolution2560 x 1920 pixels
Video formats supportedH.264, H.265
Analog signal format systemNTSC, PAL
Supported graphics resolutions640 x 480 (VGA), 800 x 600 (SVGA), 1280 x 960, 1600 x 1200 (UXGA), 2048 x 1536 (QXGA), 2560 x 1920
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, MicroSDXC
Maximum memory card size256 GB
Sensor typeCMOS
Optical sensor size1/2.7 \
White balanceAuto, Manual
Minimum illumination0.03 lx
IK codeIK10
Form factorSpherical
Mounting typeCeiling/wall
Product colorBlack, White
Country of originTaiwan
International Protection (IP) codeIP66
TypeIP security camera
Placement supportedIndoor & outdoor
Connectivity technologyWired & Wireless
Maximum operating distance30 m
Weight and Dimensions IconWeight and Dimensions
Depth99.8 mm
Width133.3 mm
Weight760 g
Package weight1100 g

Related product manuals