83
Honeywell 30 Series IP Cameras User Guide
Account Management
Figure 96 Account Management
The administrator account name is admin, which is permanent and cannot be deleted.
The administrator can create up to 20 user accounts.
To create a new user:
1. Select New user from the drop-down list.
2. Enter the new user’s name and password and confirm the password. Set the new
password according to the password requirements (see Figure 96).
3. Select the privilege level for the new user account. Click ADD to enable the setting.
The privilege levels are listed below:
Role Privilege
Administrator Full control
Viewer Live, Language
Access rights are sorted by user privilege (Administrator, Operator, and Viewer). Only
administrators can access the Configuration page. Viewers can only access the main
page for live viewing.
To change a user’s access rights or delete a user account:
1. Select an existing account to modify.
2. Make necessary changes and click UPDATE or DELETE to enable the setting.
Configuring Access List Settings
Go to Setup System Setup Access List.
This section describes how to control access permission by verifying the client PC’s IP
address.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
