EasyManuals Logo

Honeywell HC30W45R2 User Manual

Honeywell HC30W45R2
113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #47 background imageLoading...
Page #47 background image
33
Honeywell 30 Series IP Cameras User Guide
G.711 provides good sound quality and requires about 64Kbps. Select pcmu (μ-Law)
or pcma (A-Law) mode.
G.726 is a speech codec standard covering voice transmission at rates of 16, 24, 32,
and 40kbit/s.
After you complete the settings on this page, click SAVE to enable the settings.
Configuring IR Control Settings
Go to Setup Camera Setup IR Control.
On this page, you can turn on the IR illuminator and adjust the luminance of IR lights.
Figure 39 IR Control Settings
IR Illuminators
Turn on built-in IR illuminator in night mode: Check to turn on the camera’s onboard
IR illuminator when the camera detects low light condition and enters the night mode.
Smart IR
Anti-overexposure: Check to automatically adjust the shutter speed, Gain and IRIS
through algorithm of the firmware to avoid over-exposure in the night mode.
Note:
IR adjustment: Adjust the luminance of IR lights.
Figure 40 Smart IR
Manual IR adjust: Check it to control the luminance of IR lights manually. To increase
the luminance of IR lights, drag the slider to the right; to decrease the luminance of IR
lights, drag the slider to the left.

Table of Contents

Other manuals for Honeywell HC30W45R2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell HC30W45R2 and is the answer not in the manual?

Honeywell HC30W45R2 Specifications

General IconGeneral
Windows operating systems supportedWindows 10, Windows 7
DC-in jackYes
Ethernet LAN (RJ-45) ports1
Lens diameter2.8 mm
Fixed focal length2 mm
Maximum aperture number2
DC output voltage12
Power source typeDC, PoE
Power consumption (max)12.95 W
Operating temperature (T-T)-30 - 60 °C
Operating relative humidity (H-H)0 - 90 %
Wi-FiNo
Number of users10 user(s)
Ethernet interface typeGigabit Ethernet
Bit rate controlConstant Bit Rate (CBR)
Total megapixels5 MP
Gain control typeAuto
Maximum resolution2560 x 1920 pixels
Video formats supportedH.264, H.265
Analog signal format systemNTSC, PAL
Supported graphics resolutions640 x 480 (VGA), 800 x 600 (SVGA), 1280 x 960, 1600 x 1200 (UXGA), 2048 x 1536 (QXGA), 2560 x 1920
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, MicroSDXC
Maximum memory card size256 GB
Sensor typeCMOS
Optical sensor size1/2.7 \
White balanceAuto, Manual
Minimum illumination0.03 lx
IK codeIK10
Form factorSpherical
Mounting typeCeiling/wall
Product colorBlack, White
Country of originTaiwan
International Protection (IP) codeIP66
TypeIP security camera
Placement supportedIndoor & outdoor
Connectivity technologyWired & Wireless
Maximum operating distance30 m
Weight and Dimensions IconWeight and Dimensions
Depth99.8 mm
Width133.3 mm
Weight760 g
Package weight1100 g

Related product manuals