54
Honeywell 30 Series IP Cameras User Guide
6 CONFIGURING VIDEO ANALYTICS
This chapter contains the following sections:
• Configuring Motion Detection Settings, page 54
• Configuring Tampering Detection Settings, page 58
• Configuring Audio Detection, page 59
• Configuring Event Settings, page 61
Configuring Motion Detection Settings
Go to Setup Video Analytics Motion Detection.
Two sets of motion detection settings are available:
• In Normal Light Mode tab, configure normal situations for motion detection
settings.
• In Profile Mode tab, configure special situations for motion detection settings.
Night Mode: Check Enable to apply these settings at and select this mode to apply
the settings at night.
Schedule Mode: Check Enable to apply these settings at and select this mode to
apply the settings at a specific period. Enter the time manually in the field.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
