Configuring the Camera | 21
800-12004V2 - A - 01/2013
replaced by the next character that you input (as described above).
Continue to move the cursor and input new characters, as needed,
until the camera title is corrected.
7. Select RETURN by using the Up/Down/Left/Right OSD controls to return to
SPECIAL menu.
Adjusting the Camera Title Position
The position where the Camera Title is displayed onscreen can by adjusted:
1. Navigate to the Camera Title screen (see Camera Title on page 20).
2. Move the cursor to POS and press SET.
The created camera title is displayed on the video image (see Figure 22).
Figure 22 CAMERA TITLE Position
3. Select a new position for the camera title by using the four directional buttons.
Press SET to confirm the position.
Adjust
See Adjust Submenu on page 27 for more information on the options in this menu.
Camera title default position Camera title positioned by user
To Next Page
Loading...
