Configuring the Camera | 27
800-12004V2 - A - 01/2013
Resolution
This feature is used to enhance RESOLUTION. Side effects to this feature may include
increased noise and storage consumption.
Reset
Use this option to RESET the camera to its factory default settings.
Return
Select this option to save settings from the SPECIAL menu and return to the Main SETUP
menu.
Adjust Submenu
When the SPECIAL menu screen is displayed (see Special Menu on page 19), select
ADJUST using the Up and Down OSD controls and press SET.
Figure 31 SPECIAL Menu - ADJUST Submenu Selection
Sharpness
You can adjust the SHARPNESS level from 0 to 30 (see Figure 31).
ADJUST
SHARPNESS
15
MONITOR LCD
GAMMA 0.55
LSC OFF
LANGUAGE ENGLISH
COMMUNICATION
OFF
DEFECT AUTO
RETURN
SPECIAL
CAMERA TITLE OFF
ADJUST
MIRROR OFF
MOTION DET OFF
PRIVACY OFF
SYNC INT
RESOLUTION NORMAL
RESET NO
RETURN
To Next Page
Loading...
