26 | HD251(X)/HD262(X)/HB273(X) Camera Configuration Guide
www.honeywellvideo.com
MOVE-XY You can change the position of the current Privacy Mask with the MOVE-XY
option (see Figure 29).
a. Use the Up or Down OSD controls to select MOVE-XY and press SET.
b. Use the Up, Down, Left or Right OSD controls to move the Privacy Mask in
the direction that you have pressed.
c. Press SET to confirm the new position of the Privacy Mask.
AREA DISPLAY ON : Activates area display. OFF: Disables the area display.
4. Repeat these steps for each Privacy Mask needed for your camera.
5. Move the arrow indicator to RETURN after completing the setup to return to
SPECIAL menu.
Sync (Internal Synchronization)
Note SYNC is always internal for camera models HD251X)and HD262(X).
For the HB273(X) camera, when the SPECIAL menu is displayed, use the Up or Down OSD
controls to access the SYNC menu (see Figure 30).
Figure 30 SPECIAL Menu - SYNC Submenu Selection
SPECIAL
CAMERA TITLE OFF
ADJUST
MIRROR OFF
MOTION DET OFF
PRIVACY OFF
SYNC INT
RESOLUTION NORMAL
RESET NO
RETURN
L.L.
ADJUST
100
RETURN
To Next Page
Loading...
Need help?
General
