Honeywell Hyperion 1300G User Manual

10 - 1
10
Product Specifications
Hyperion 1300g Product Specifications
Parameter Specification
Mechanical
Height
5.9 inches (15 cm)
Length
4.4 inches (11.2 cm)
Width
3.1 inches (7.9 cm)
Weight
5.6 ounces (160 g)
Electrical
LED source
630 nm visible red LED
Input Voltage
4.5-5.5VDC at imager
Operating Power
200mA @ 5V
Standby Power
125mA @5V
Environmental
Operating Temperature
32° F to +122° F (0° C to +50° C)
Storage Temperature
-40° F to +140° F (-40° C to +60° C)
Humidity
0 to 95% non-condensing
Drop
Operational after 50 drops from 5 feet
(1.5 m) to concrete
Environmental Sealing
IP41
Light Levels
70,000 lux
ESD
15 kV to any external surface
Scan Performance
Scan Pattern
Single Line
Motion Tolerance
20 inches (51 cm) per second
Scan Rate
Up to 270 scans per second
Print Contrast
20%
Pitch, Skew
±65
Decode Capabilities
Reads standard 1D and GS1 DataBar
symbologies
Optional External Power Supply
Requirements
Use only a Listed Limited Power Source (LPS) or
Class 2 type power supply with output rated 5 to
5.2Vdc, 1A

Honeywell Hyperion 1300G Specifications

General

Type	Handheld bar code reader
Sensor type	-
Scanner type	1D
Maximum range	0.66 m
Read rate (max)	270 reads/s
Pitch reading angle	-65 - 65 °
Light levels (direct sunlight)	0 - 70000 lx
Cable length	3 m
Standard interfaces	USB
Connectivity technology	Wired
Input voltage	5 V
Power consumption	200 mA
Safety	RoHS, CE
Shockproof	Yes
Product color	Black
International Protection (IP) code	IP41
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	112 mm
Width	79 mm
Height	150 mm
Weight	160 g