5 - 3
format you are clearing. Scan the Terminal Type (refer to the Supported
Terminals Chart on page 5-4), Code I.D. (refer to the Symbology Chart on
page A-1), and the bar code data length for the specific data format that you
want to delete. All other formats remain unaffected.
• Save from the inside the back cover of this manual
This exits, saving any Data Format changes.
• Discard from the inside the back cover of this manual
This exits without saving any Data Format changes.
Clear One Data Format
Clear All Data Formats
Save
Discard
To Next Page
Loading...
