EasyManuals Logo

Honeywell LYNX Touch 7000 User Manual

Honeywell LYNX Touch 7000
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
17 74-2760—1
What You Do What You See What Happens
View user keypad The disarmed mode is
displayed.
Press The mode menu displays the
first two selections:
1-AWAY ALL ON turns on both
your perimeter and interior
protection.
2-AWAY PARTIAL turns on any
protection you have
predetermined.
Press
or
to leave
or
The new mode displays. The
EXIT NOW prompt also
displays. A warning tone sounds
during the exit delay period.
Arming Your System When Leaving Home
When arming your system, first check the LED next to the DOWN arrow. If the LED is lit,
press the DOWN arrow to view open protection. Close protection before arming. See
the Force Arming Your System section to Arm your system around an open protection
point.
NOTE: The EXIT NOW prompt and warning tone mean that the exit delay time
programmed for your system is now in effect and you should leave through a
designated door before the time expires to avoid causing an accidental
alarm. The warning tone rate increases the last ten seconds of the delay
period, indicating that an alarm is about to be reported. The EXIT NOW
prompt disappears when the delay time expires.
THE SMITH'S
M6942
1– AWAY ALL ON
2– AWAY PARTIAL
M6943
AWAY ALL ON
EXIT NOW
M6944A
AWAY PARTIAL
EXIT NOW
M6945

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell LYNX Touch 7000 and is the answer not in the manual?

Honeywell LYNX Touch 7000 Specifications

General IconGeneral
BrandHoneywell
ModelLYNX Touch 7000
CategorySecurity System
LanguageEnglish

Related product manuals