74-2760—1 16
• All perimeter and interior security protection points
are on.
• Exit and entry delay.
• Perimeter protection is on.
• Only predetermined interior protection is on.
Example: This may be used when running an
errand and pets are roaming free in
the house.
• Exit and entry delay.
• Perimeter protection is on.
• Only predetermined interior protection is on.
• No exit delay.
• There is an entry delay if someone opens an
entry door.
Example: Use this mode when you are home,
you want your exterior protection on,
and you may have people entering
your home.
• Perimeter protection is on.
• Only predetermined interior protection is on.
• No exit delay.
• No entry delay. system instantly alarms when a
security point is tripped.
Example: Use this mode when nobody will be
entering or leaving your home and
everyone is asleep. If someone were to
walk through a door, the system will
instantly alarm.
• All points you have designated as ON WATCH
sound a short audible when tripped, and display the
tripped point on the keypad for 20 seconds.
• All perimeter and interior protection is ON WATCH,
sounds a short audible when tripped, and displays
the tripped point on the keypad for 20 seconds.
• Allows customer to test each point of protection.
Standard Security Modes
The following Security Modes are pre-programmed:
1– AWAY ALL ON
M6936
2– AWAY PARTIAL
M6937
3– HOME
M6938
4– HOME SLEEP
M6939
5– ON WATCH
M6940
6– SYSTEM TEST
M6941