47 74-2760—1
Service Option
The Service option allows you to enable and disable the use of a service passcode
which will allow a service person to access your security system to view the event log,
verify trouble conditions, and effect repairs without your having to reveal your
passcode. Until you enable this option, the service technician cannot gain access to
the system.
Enabling Service Access
What You Do What You See What Happens
Press
and use the arrow
keys
The Options menu displays.
Press
The system prompts you to
enter your passcode (unless it
was already entered within the
last 30 seconds). Only a Master
passcode can authorize.
Enter passcode Current service mode status
displays.
Press
New service mode displays.
Press
System returns to current mode.
ENTER PASSCODE
M6949
5– ALLOW PROGRAM
6– SERVICE
M6979A
SERVICE PASSCODE
ENABLED
M6981
SERVICE PASSCODE
DISABLED
M6980
ENTER PASSCODE
M6949
NOTE: Upon completion of the service call, repeat the procedure to disable the
Service Passcode.
To Next Page
Loading...
Need help?
General
