Honeywell nfs2-3030 - Page 13

NFS2-3030 Programming Manual — P/N 52545:K1 03/20/2012 13
Getting Started General Information
Figure 1.1 Change Password Screen
Soft Keys
MASTER PASSWORD - Press to change the master password
USER PASSWORD - Press to change the user password.
Master Password
Press the MASTER PASSWORD Soft Key to display the following screen. Enter a new password
that will replace the factory default password: there can be up to eight alphanumeric characters.
Press the enter key on the keyboard. RE-
ENTER PASSWORD will appear. Reenter the password for
verification. Press enter to save the new password.
Figure 1.2 Change Master Password Screen
CHANGE PASSWORD
MASTER PASSWORD
USER PASSWORD
BACK
NOTE: Only a master can change another password.
CHANGE MASTER PASSWORD
ENTER PASSWORD ********
RE-ENTER PASSWORD ********
BACK