ID61/62 Series Panel - Operating Manual
Operator Actions at Panel
19 997-458-000-8, Issue 8
January 2010
4.8 Level 2 Option Menus
The following Level 2 Option Menus are available after a
correct Level 2 access code has been input or the
keyswitch has been operated (except the Print menu,
which is only available if a printer is fitted).
The menu map at left shows an overview of the Level 2
menus. The Commissioning menu is shown inverted to
indicate that a Level 3 access is required.
Notes:
1. Level 3 Configuration Menus are
described in 997-457-000-X, ID61/62
Series Panel Installation,
Commissioning & Configuration
Manual, Section 5 Configuration.
2. With a fire alarm active the panel
status display will override the user
menu 15 secs after the last key press.
* Only available when event printing is configured for ‘On-demand’
printing
.
*
To Next Page
Loading...
Need help?
General
