Honeywell RAEGuard 3 - Page 64

RAEGuard 3 User Manual
64
Gas
Default
Range
Selectable
Full Scale
Range
Resoluti
on
Lower
Detecta
ble Limit
Default
Cal.
Point
Selectable
Cal. Gas
Range
Response
Time T90/T10
Accuracy
Default
Alarm 2
Default
Alarm 1
O
2
30.0%vol
25.0-30.0%vol
0.1%vol
-
20.9%vol
20.9%vol
(Fixed)
<20s
<30s
<±0.7%vol
23.5%vol▲
19.5%vol▼
H
2
S
100ppm
20.0-200.0ppm
0.1ppm
0.5ppm
50ppm
30 to 70%
of Full
Scale
Range
<25s
<25s
<±5ppm
20ppm▲
10ppm▲
CO
500ppm
50-1000ppm
1ppm
3ppm
250ppm
<25s
<25s
<±5ppm
50ppm▲
25ppm▲
*LEL
100%LEL
100%LEL
1%LEL
-
50%LEL
<25s
<30s
<±5%LEL
50%LEL▲
25%LEL▲
*CH
4
-IR
100%LEL
100%LEL
1%LEL
-
50%LEL
<30s
<35s
<±5%LEL
50%LEL▲
25%LEL▲
Note: The performance characteristics of the above products are typical results tested in an environment with a temperature of +20 ° C and a humidity of 50% RH. When calibrating, use the
calibration cap and the recommended flow for detection. If the sunshade/deluge protection is used instead or the detection is carried out at low temperature, its response speed will be
slowed down.
LEL model is FGM-6100/6100S. NDIR model is FGM-6200/6200S. Toxic and Oxygen models are: FGM-6300/6300S. No suffix that means aluminum alloy housing material, and "S” that
means a stainless steel housing material.
* For availability, please contact Honeywell Analytics.
1ppm is equivalent to 1μmol/mol.