EasyManua.ls Logo

Honeywell SLC - MMF-300-10 Monitor Module

Honeywell SLC
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30 FireLite SLC Wiring Manual — P/N 51309:P4 9/17/2014
Monitor Modules Descriptions
MMF-300-10 Monitor Module
This is an addressable monitor module intended to interface between the FACP and up to ten (10)
Style B (Class B) or five (5) Style D (Class A) IDCs containing normally open contact devices.
This type of module is contained in either a BB-2 or BB-6 cabinet. The BB-2 can accommodate up
to 2 modules and the BB-6, which requires the CH-6 chassis, can accommodate up to 6 modules.
See the Installation Instructions provided with module for proper installation into a cabinet.
Disable Address
Place shunt in:
Disable 1 position to disable highest module address
Disable 2 position to disable highest two module addresses
Style Y or Style Z Select
Remove shunt for Style Z circuits
SLC Address
Set rotary switches to base
(first) address of modules
Figure 5.2 MMF-300-10 Monitor Module
m
m
f
-
3
0
0
-
1
0
.
w
m
f

Table of Contents

Related product manuals