Page 94 SMV800 Modbus User's Guide Revision 1.0
2.8 Offline Configuration
Offline Configuration using Honeywell SmartLine Modbus Manager application
Overview
Offline Configuration refers to configuring a device when the device is not physically
present or communicating with the application. This process enables you to create and save
a configuration for a device, even when the device is not there physically. Later when the
device becomes available with live communication, the same configuration can be
downloaded to the device. This feature enables you to save on device commissioning time
and even helps you to replicate the configuration in multiplicity of devices with lesser
efforts.
The following are the tasks that you need to perform for importing offline configuration
from SmartLIne Modbus Manager application software and then downloading it to the
device.
Create offline configuration template
Save the configuration in XML format.
Load the offline configuration
Download the offline configuration to the device
Note: Some of the parameters cannot be configured in offline mode as application needs
information from device.Local Display Screen Configuration and Totalizer parameters are
few such parameters.
1. Offline Configuration
1. Open the SmartLine Modbus Manager Host application. Right click on device and
select “Offline Configuration” as shown in below figure
2. The below window will appear and click on “Offline Configuration”
To Next Page
Loading...
