Honeywell SMV800 - 2.3.10. Meterbody Details

Page 64 SMV800 Modbus User's Guide Revision 1.0
2.3.10. Meterbody Details:
This tab provides the detail information about the meterbody. User can read the meterbody
ID and model key using this tab.
Refer below tables for meter body details.
Meter Body Details Parameters
Key: Plain = Read only Bold = Configurable Bold underline = Method Bold italic = Table or graph
Pressure Sensor Type
Pressure Sensor Type
MB ID
The serial number of the Meter Body
Model Key
The Key Number portion of the device
model number (representing the
Differential and Static Pressure
measurement ranges for this device)
Table I Info
The Table I portion of the device model
number (represents the temperature
sensor input type available for this device)
Table II Info
The Table II portion of the device model
number (indicates availability of Digital
Output for this device)
Table III Info
The Table III portion of the device model
number (indicates various materials of
construction for this device)
Input Type
Temp Sensor Input
Identifies the availability of single or dual
temperature sensor input
Temp Sensor Type
Identifies the availability of the type of
sensor input (RTD-only input or Universal)
Digital Output
Identifies the availability of Digital Output
Material Details
Process Head Material
Material of construction for the Meter Body
process heads
Diaphragm Material
Material of construction for the Meter Body