Honeywell SMV800 - 2.3.9. Diagnostics

Revision 1.0 SMV800 Modbus User's Guide Page 63
2.3.9. Diagnostics:
This tab provides the information about the device diagnostic configuration selection for
error log. User can read and write the transmitter install date using this tab which is used by
device for advance diagnostics related to process values tracking
Diagnostics – Error Log
Key: Plain = Read only Bold = Configurable Bold underline = Method Bold italic = Table or graph
Error Log
Error Log Flag
Allows selection to Enable or Disable the Error Log
Reset Error Log
Allows resetting of the Error Log
Diagnostics – Advanced Diagnostics – Write Install Dates
Key: Plain = Read only Bold = Configurable Bold underline = Method Bold italic = Table or graph
Sensor Install
Date
One-time writable installation date for the
thermocouple or RTD sensor for measuring the
temperature input
Write Install Dates
Tx Install Date
One-time writable installation date for the Meter
Body.
TM Install Date
One-time writable installation date for the
Temperature Module.