Honeywell SMV800 - 2. Configuration; 2.1 Software installation and setup

Page 4 SMV800 Modbus User's Guide Revision 1.0
2. Configuration
2.1 Software installation and setup
2.1.1. System requirements
The purpose of this document is to describe the installation of the “SmartLine Modbus
Manager”, a PC based application used to configure SMV Modbus transmitter
The Following are the minimum system requirements to install the Modbus Host:
Microsoft® Windows™ Operating System (32- bit or 64-bit) as given below.
 Windows 7
 Windows 8.1
 Windows 10
 Windows server 2012
 Windows Server 2016
 Recommended to use Isolated USB-RS485 modem hardware and it’s driver for
USB modem option
 Proper Execution of host requires a standard PC with at least following resources:
o 1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
o 1 gigabyte (GB) RAM (32-bit) or 2 GB RAM (64-bit)
o Screen Resolution at least 1280x1024, 1280x960, 1280x800 pixels
2.1.2. Hard Disk Space:
The Modbus Host requires minimum 250MB Hard Disk space.
2.1.3. Downloads
Download: Honeywell PC based Modbus Host application “ SmartLine Modbus Manager” from
HPS websites given below
https://www.honeywellprocess.com/all-downloads.aspx
and
https://www.honeywellprocess.com/smartline-smv800-multivariable-transmitter.aspx