Revision 1.0 SMV800 Modbus User's Guide Page 177
4.1.2. Static Pressure Calibration
Navigate to Maintenance->Calibration and Correction Records->Static Pressure Calibration
to perform SP Calibration using SMV Modbus Manager application tool.
The Static Pressure Calibration screen has following options.
1. SP URV Correct
2. SP LRV Corrrect
3. SP Reset Corrects
4. SP Zero Trim
5. Records that include Current, Last and Previous Calibration/Corrects dates.
By default, Records show the date as Jan 01 1972.
To Next Page
Loading...
