Revision 1.0 SMV800 Modbus User's Guide Page 7
2.1.5. Getting started
1. Connect the device to power supply,
2. Connect the RS485 modem to device RS485 terminals and other end to COM Port
System on which Modbus Manager application is installed.
3. Run “SmartLine Modbus Manager” Host.
4. Now Add the Device by clicking on Add Device (plus) button.
5. Device List window will appear to add the device, click on the particular Device
(Ex: SMV800 Device).
6. Click on Ok button, user can see the below offline screen, status will be in Red
color, as the device is not connected.
To Next Page
Loading...
