Revision 1.0 SMV800 Modbus User's Guide Page 185
4.1.5. Simulate Device Variables
Process Values such as Differential Pressure, Static Pressure, Process Temperature and Flow output
can be temporarily simulated by user. An option is provided for user to write defined simulated
values to device. When the device is power cycled, the configuration is lost, device reports the
actual values as measured.
To enable simulation of device variables, navigate to Device Setup->Advanced Flow Setup->Flow
Configurations screen as given below. Check the box “Simulation On” for individual device
variable and enter the value and continue the Flow configuration screen completion.
To Next Page
Loading...
