Honeywell SMV800 - Table 2-3: Pre-Programmed Volumetric Flow Engineering Units for Flow; Table 2-4: Pre-Programmed Mass Flow Engineering Units for Flow

Revision 1.0 SMV800 Modbus User's Guide Page 25
Engineering Units
The Flow Config tab displays the Lower Range Value (LRV), Lower Range Limit (LRL), Upper Range
Value (URV) and Upper Range Limit (URL) for Flow in the unit of measure selected in the
Engineering Units field “Flow Unit”.
Flow Engineering Units
Select one of the preprogrammed engineering units for display of the flow measurements, depending
upon type of flow measurement configuration. Table 2-3 lists the pre-programmed engineering units
for volumetric flow and Table 2-4 lists the engineering units for mass flow.
Table 2-3: Pre-programmed Volumetric Flow Engineering Units for Flow
Engineering Unit
Meaning
M
3
/h
d
Cubic Meters per Hour
gal/h
Gallons per Hour
l/h
Liters per Hour
cc/h
Cubic Centimeters per Hour
m
3
/min
Cubic Meters per Minute
gal/min
Gallons per Minute
l/min
Liters per Minute
cc/min
Cubic Centimeters per Minute
m
3
/day
Cubic Meters per Day
gal/day
Gallons per Day
Kgal/day
Kilogallons per Day
bbl/day
Barrels per Day
m
3
/sec
Cubic Meters per Second
CFM
Cubic Feet per Minute
CFH
Cubic Feet per Hour
Table 2-4: Pre-programmed Mass Flow Engineering Units for Flow
Engineering Unit
Meaning
Kg/sec
Kilograms per Second
Kg/min
Kilograms per minute
Kg/h
Kilograms per Hour
lb/min
Pounds per Minute
lb/h
Pounds per Hour
lb/sec
Pounds per Second
t/h
d
Tonnes per Hour (Metric Tons)
t/min
Tonnes per Minute (Metric Tons)
t/sec
Tonnes per Second (Metric Tons)
g/h
Grams per Hour