Honeywell SMV800 - 2.3.4. Static Pressure Configuration

Revision 1.0 SMV800 Modbus User's Guide Page 19
2.3.4. Static Pressure Configuration
This tab provides the detail information about the Static Pressure parameters.
Refer the below table for Static Pressure Configuration:
Static Pressure Configuration parameters
Key: Plain = Read only Bold = Configurable Bold underline = Method Bold italic = Table or graph
Static Pressure Config
Static Pressure
The current value of the Static Pressure
input
Static Pressure Unit
● inH2O (68
O
F)
● inHg (0
O
C)
● ftH2O (68
O
F)
● mmH2O (68
O
F)
● mmHg (0
O
C)
● psi
● bar
● mbar
● g/cm2
● kg/cm2
● Pa
● kPa
● Torr
● Atm
● inH2O@60
O
F
● MPa
● inH2O@4
O
C (39.2
O
F
● mmH2O@4
O
C (39.2
O
F)
The user selected engineering unit for
the Static Pressure input