Honeywell SMV800 - Page 144

Page 132 SMV800 Modbus User's Guide Revision 1.0
Flow Unit
58
Allows configuring Flow unit.
All the units are self-
Explanatory.
Custom Unit:
When this unit is selected,
Tools will populate
Flow Custom Tag
Flow Base Unit : Base unit is
unit from which
custom unit is derived
Flow Conver. Factor: Enter a
numeric value that
represents the number of
base units per one
custom unit.
Example:
Flow Custom Tag:
MyNewUnit
Flow Base Unit: g/sec
Flow Conver Factor: 0.5
(means 0.5 g/sec = 1
Custom Unit)
Flow Rate = 50 g/sec
Flow Rate in “MyNewUnit”
will be = (50/0.5)
MyNewUnit
RW
uint8
Mass Flow Base Unit
70 - g/sec
71 - g/min
72 - g/h
73 - kg/sec
74 - kg/min
75 - kg/h
76 - Kg/d
77 - t/min [Metric tons]
78 - t/h [Metric tons]
79 - MetTon/d
80 - lb/sec
81 - lb/min
82 - lb/h
83 - lb/d
84 - STon/min
85 - STon/h
86 - STon/d
87 - LTon/h
88 - LTon/d
89 - Custom
Volume Flow Base Unit:
19 - m3/h
131 - m3/min
28 - m3/sec
29 - m3/day
16 - gal/min
136 - gal/h
235 - gal/day
17 - l/min
138 - l/h
15 - ft3/min
26 - ft3/sec
130 - ft3/h
135 - bbl/day
22 - gal/s
24 - L/S
27 - Cuft/d
121 - NmlCum/h
122 - NmlL/h
123 - StdCuft/min
132 - Bbl/s
133 - Bbl/min
134 - Bbl/h
181 - Nml m3/d
182 - Nml m3/min
184 - Std ft3/d
185 - Bbl/h
186 - Nml m3/s
187 - Nml m3/d
188 - Nml m3/min
189 - Std ft3/d