Honeywell SMV800 - Page 211

Revision 1.0 SMV800 Modbus User's Guide Page 199
Warning
No Flow Output
The Flow Algorithm
has been configured
for “No
Flow Output”.
This bit will be set
when flow output
algorithm type
configured as No flow
output. Configure
Flow Output algorithm
type if required
otherwise ignore this
warning.
Bit - 6
119
DP/SP/PT/FLOW
Simulation Mode
Process variables
simulation enabled
This bit is set when
any of the process
variables like
DP,SP,PT and Flow
are configured for
Simulation.
Simulation mode(sim)
is enabled for the Diff,
Static Press, Process
Temp or Flow. Sim
mode simplifies
testing of flow calc
prior to online
operation.\nWhile
conducting testing,
the status indicates
that sim is being
used. When testing is
completed, clear the
sim mode for the
inputs to return to true
process
measurement
Bit - 7