Honeywell SMV800 - Page 62

Page 50 SMV800 Modbus User's Guide Revision 1.0
Flow Configuraiton Screens
Configure Discharge coefficients, compensation and failsafe settings and Simulation
values.
Refer below tables for more details regarding parameters.
Flow Configuration Parameters
Key: Plain = Read only Bold = Configurable Bold underline = Method Bold italic = Table or graph
Manual Input
Manual Input
(for Coefficient of Discharge_Cd)
ON
OFF
Coefficient of Discharge_Cd
(entry field when Manual Input is ON)
Manual Input
(for Expansion Factor_y)
ON
OFF
Expansion Factor_Y
(entry field When Manual Input is ON)
Manual Input
(for Temp Expansion Factor_Fa)
ON
OFF
Temp Expansion Factor_Fa
(entry field When Manual Input is ON)