Honeywell SMV800 - Page 67

Revision 1.0 SMV800 Modbus User's Guide Page 55
Temperature Failsafe (PV3)
continued
Default / Nominal Temperature.
Fluid = Steam: Flow equation Uses
Design Density.
Design Temperature = 1.
SMV3000 or SMV800 Dynamic:
Fluid = Gas, Liquid, Steam:
Flow equation uses Nominal/Default
Temperature
Simulation
Simulate Differential
Pressure
ON
OFF
User enters the values as selected in
Unit Configuration screen
Simulate Static Pressure
ON
OFF
User enters the values as selected in
Unit Configuration screen
Simulate Temperature
ON
OFF
User enters the values as selected in
Unit Configuration screen
Simulate Mass Flow
ON
OFF
User enters the values as selected in
Unit Configuration screen