Honeywell SMV800 - Page 78

Page 66 SMV800 Modbus User's Guide Revision 1.0
Tx Electronics Selections
Electronic Housing Material
Material of construction for the electronics
housing
Connection Type
Size/type of wiring conduit ports on the
housing
Lightning Protection
Identifies if lightning protection is installed
Analog Output
Identifies the availability of Analog Output
Digital Protocol
Identifies the device Digital
Communications Protocol (HART, DE,
Modbus)
Customer Interface
Indicator
Identifies the type of Display available
(None or Advanced)
Ext Zero, Span & Config
Buttons
Identifies the selection of external
calibration buttons available
Languages
Identifies the selection of languages
available via the Display and
communications hosts
Configuration Selections
Diagnostics
Standard Diagnostics is the only selection
available
Write Protect
Identifies the hardware write protect
configuration ordered with the device (On
or Off)
Failsafe
Identifies the analog failsafe configuration
ordered with the device (High or Low
burnout)
Hi & Lo Output Limits
Identifies the configured high and low
analog output range (Standard or Namur)
General Configuration
Identifies the configuration ordered with the
device (standard configuration or custom)
Accuracy & Calibration
Accuracy
Only Standard Accuracy is available
Calibrated Range
Identifies the factory calibration selection
ordered for this device (Standard factory
calibration or custom range) for the three
process inputs (Differential Pressure, Static
Pressure, Process Temperature)
Calibration Type
Identifies the number of custom factory
calibrations ordered for this device (single,
dual, or triple custom calibrations are
available for Differential and Static
Pressure inputs)
Accessory Selections
Mounting Bracket Type
Identifies the shape (angle or flat) of the
device mounting bracket ordered with the
device
Mounting Bracket Material
Identifies the material of construction of the
device mounting bracket ordered with the
device
Customer Tag
Identifies the number of identification tags
ordered for this device (none, one or two)
Unassembled Conduit
Plugs & Adapters
Identifies the size, quantity and material of
any unassembled conduit plugs and
adapters ordered with this device
Certifications & Warranty
Lists all special certifications and
warranties ordered with this device
Factory Identification
Identifies the location of the factory for
manufacturing this device