25
Commissioning
3. A list of devices in the loop are shown in the Loop 1 Learn Summary screen. The loop
devices can be configured, one loop at a time. If the panel has more than one loop of
devices, the total devices configured for each loop is to be detected and learned
individually.
Figure 5.16 Learn Summary
4. Tap LEARN in PERIPHERALS. The Peripherals screen appears.
5.3 User Management
In User Management, you can configure maximum 10 users with Level 2 access with
passcodes. You can perform following configurations:
• Add User
• Delete User
• Edit Passcode
5.3.1 Configure Level 2 User
1. In the Commissioning screen, tap User Management. Refer Figure 5.2 on page 16.
2. Tap next to Level 2 Users.
Figure 5.17 User Management
To Next Page
Loading...
Need help?
General
