EasyManua.ls Logo

Honeywell TR50 - Correction and Calibration; Sensor Offset

Honeywell TR50
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHAPTER
6
CHAPTER
6
TR50 - User Guide 73
CORRECTION AND CALIBRATION
This chapter provide TR50 sensor offset functionality and sensor calibration
information.
6.1 Sensor Offset
The sensor offsets allow the user to fine tune each sensor reading to match their
known good instrument reading.
TR50 provide the following sensor offset configuration items,
# Configuration Items Comments
1 cfgTempSensorOffset
Offset for temperature sensor, this value will be
added to the sensor chip raw value within TR50
device itself, than TR50 will provide the final value.
2 cfgHumiSensorOffset
Offset for humidity sensor, this value will be added to
the sensor chip raw value within TR50 device itself,
than TR50 will provide the final value.
3 cfgPM2.5SensorOffset
Offset for PM2.5 sensor, this value will be added to
the sensor chip raw value within TR50 device itself,
than TR50 will provide the final value.
4 cfgPM1.0SensorOffset
Offset for PM1 sensor, this value will be added to the
sensor chip raw value within TR50 device itself, than
TR50 will provide the final value.
5 cfgPM10SensorOffset
Offset for PM10 sensor, this value will be added to
the sensor chip raw value within TR50 device itself,
than TR50 will provide the final value.
6 cfgTVOCSensorOffset
Offset for TVOC sensor, this value will be added to
the sensor chip raw value within TR50 device itself,
than TR50 will provide the final value.

Table of Contents

Related product manuals