Honeywell TR50 - Modbus Configuration

26 TR50 - User Guide
4.4.5.10 Alarm Points
4.4.6 Configure TR50 Bacnet Device via Niagara
Follow the below steps to configure the TR50 Bacnet device in Niagara:
Step 1. Add a BacnetNetwork.
Step 2. Navigate to Config > Drivers and double-click on BacnetNetwork.
Step 3. Select the Hon Bacnet Device Manager from the top right corner and-
click Discover.
The Configure Device Discovery dialog box appears.
Point Name
BACnet
Instance
Read/
Write
Type
Default
Value
Range
cfgIsAlarmLocalDetectionEnable 1 R/W Binary Value 1 0: Disable
1: Enable