6 TR50 - User Guide
2.1.2 Restricting Access to Network
Prevent unauthorised access to the network (e.g., BACnet MSTP, Modbus, or
Sylk
TM
bus) that the Smart Sensor uses. With any system, preventing physical
access to the network and equipment reduces the risk of unauthorised
interference. When using open protocols such as Modbus or BACnet MSTP, care
should be taken to ensure that the physical network is protected from
unauthorised access.
2.2 Steps to Install TR50 Sensor
1. Switch OFF the power supply before initiating the TR50 IAQ Sensor installation.
2. Loosen the bottom screw by turning it anticlockwise with the help of a
screwdriver.
To Next Page
Loading...
Need help?
General
