About the System (cont'd)
7
In Commercial mode, the Arming options are: Open, Close, and Night.
To enter Residential mode (automation), from the “Home” screen press the following icons:
Setup > System setup > CS Setup . Enter your authorized code and press the
Options icon; the “OPTIONS and OPERATING MODES” screen is displayed. Highlight the
Automation Mode check box to enable the option.
To change the occupancy delay time, (the amount of time you want to allow for authorized entry
or exit without causing an alarm) select a time interval from the Occupancy Delay drop-down
list: choose from 15, 30, 60, 120 or 225 seconds.
When done, press Apply to save the settings.
The message is displayed:
“WARNING Keypad will reset to activate changes … Do you want to save
changes.”
Select Yes or No .
To enter Commercial mode (automation), from the “Home” screen press the following icons:
Setup > System setup > CS Setup . Enter your authorized code and press the
Options icon; the “OPTIONS and OPERATING MODES” screen is displayed. Highlight the
Automation Mode check box to enable the option then select the Commercial check box.
To change the occupancy delay time, select a time interval from the Occupancy Delay drop-down
list: choose from 15, 30, 60, 120 or 225 seconds.
When done, press Apply to save the settings.
The message is displayed:
“WARNING Keypad will reset to activate changes … Do you want to save changes.”
Select Yes or No .
Normal Mode
Normal Mode is used when a control panel is connected and provides security functions.
Demo Mode
Demo Mode allows the automation and multimedia features to operate in a security mode for
demonstration purposes only.
Safe Mode
The Safe Mode may be automatically entered by the program on a communication failure or may be
entered manually on command.
To Exit the Safe Mode:
1. Press the ! SAFE MODE ! bar
.
2. Select “Yes” to return to the Normal Mode of operation. Tuxedo resets and normal operation returns
as long as the original conditions that caused the entry into Safe Mode do not still exist.
To Enter Safe Mode:
To Next Page
Loading...
Need help?
General
