Notes and Compatible Devices (cont'd)
51
System Troubles
The “Security” screen also displays an Icon(s) if a system trouble(s) occurs. If a Trouble Icon is shown,
contact your alarm company. The following Icons may be shown as applicable to your system:
Note: If multiple faults exist, press the More Choices icon and then the Show Zones icon to view and
scroll through the complete list of faults.
ICON FUNCTION
AC Loss – The system is not receiving AC power.
Bell Failure – The system bell or siren has a problem. Note: This Icon displays when
interfacing with residential panels only.
Expander Failure – The system has a failure in an expansion module.
Low Battery – The system battery, that powers the system during an AC power loss, is
low.
LRR Supervision Failure – The Communication Device used to communicate with the
central station has a supervision failure
Max Attempts Exceeded – The system has exceeded the maximum attempts to
communicate with the Central Station.
Pager Failure – The system cannot communicate with an assigned pager.
Telco-1 Cut – The system is not able to communicate with the central monitoring station
over the primary phone line.
Telco-2 Cut – The system is not able to communicate with the central monitoring station
over the secondary phone line.
Wireless Failure – The system is not able to communicate with its wireless devices.
To Next Page
Loading...
