About the System (cont'd)
2
Feature Description
non-security mode for demonstration purposes only.
Automation (Occupancy) Mode is used to simulate a security system when a
security system is not connected. Automation mode allows you to set the Tuxedo in
two conditions: Residential and Commercial. Scenes can be set to trigger based on
the status of these settings.
Safe Mode is a limited mode of operation that serves as a backup mode to ensure
that you can communicate with your system. Refer to the Safe Mode section for
further information.
Switchable
Themes
(Views)
Switch from normal view to mobile view depending on the type of device used with
the Tuxedo. Refer to Remote Access section for details.
User Codes
Each user was assigned a name and 4-digit user code by your installer at the time
of installation. Additional users can be added as needed.
Extended
Functionality
Additional control panel functions can be accessed through the console emulation
mode which emulates a standard alpha keypad on your Tuxedo touch-screen.
Refer to your Control Panel User Guide for these features.
Setup Menus
If needed, various system settings can be programmed including time and date,
remote access, display and audio features, language selection, etc.
U
L
Wi-Fi has not been evaluated by UL.
To Next Page
Loading...
Need help?
General
